Industrial Solid Color
High-build roller-applied epoxy with a polyurethane topcoat. The workhorse for warehouses, plants and distribution bays.
- 12–20 mil build
- Forklift & pallet-jack rated
- Optional safety-line striping
Commercial & Industrial
Commercial EpoxyFlooring
Seamless, chemical-resistant resin floors engineered for facilities that can't afford downtime — warehouses, showrooms, commercial kitchens, gyms and retail. Design the finish yourself and get a ballpark number before a rep ever calls.
Back in service in as little as 24 hours
Forklift, chemical and washdown rated
Custom color matching to your brand
Systems
Built for the Way You Use the Floor
We spec the resin system to the abuse it will take — traffic, chemistry, temperature and cleanability — then finish it to match your space.
Metallic Showroom
Three-dimensional pigment pours that read like liquid stone. Built for auto showrooms, lobbies and retail floors.
- Custom color matching
- Matte, satin or high gloss
- Seamless, easy-clean surface
Quartz & Flake Broadcast
Broadcast media locked in resin for slip resistance and hard wear — kitchens, breweries, locker rooms and wash bays.
- Anti-slip texture options
- Thermal-shock resistant
- USDA/FDA-friendly build
Urethane Cement
Heavy-duty resurfacer for food and beverage production where steam, acids and hot water are daily reality.
- Withstands 250°F+ washdown
- Chemical & acid resistant
- Cove base integration
Sectors
Spaces We Coat
Process
From Walkthrough to Wheels-On
- 01
Design & Ballpark
Upload a photo of the space, pick your system and finish, and get an instant square-foot estimate.
- 02
Site Assessment
We test moisture, check slab condition and confirm the schedule that keeps your operation running.
- 03
Mechanical Prep
Diamond grinding or shot blasting to a proper profile, then crack, joint and spall repair.
- 04
Install & Topcoat
Resin goes down in controlled lifts, followed by the topcoat that sets gloss and slip resistance.
Commercial Epoxy FAQ
How much does commercial epoxy flooring cost?
Most commercial installations land between $4 and $12 per square foot depending on system, surface prep and floor condition. Solid-color industrial coatings sit at the low end; metallic showroom pours and urethane cement sit at the high end. Run your space through our design tool for a ballpark figure in minutes.
How long will my facility be down?
A typical 3,000 sq ft space is diamond-ground, coated and topcoated in 2–4 days. Light foot traffic usually returns 24 hours after the final coat and full chemical cure lands around day seven. We schedule nights and weekends when production can't stop.
How long does a commercial epoxy floor last?
Properly prepped and topcoated systems run 10–20 years in commercial service. Longevity comes from mechanical surface prep and the right topcoat — not from the epoxy thickness alone.
Can you coat over existing concrete or old coatings?
Yes. We diamond-grind or shot-blast to bare, profiled concrete, then patch spalls, joints and cracks before any resin goes down. Failing prior coatings are removed rather than coated over.
Is it slip resistant?
Every system can be finished with a broadcast aggregate or textured additive to hit the slip resistance your insurer or health inspector requires, without giving up cleanability.
Get a Ballpark on Your Facility
Two minutes in the design tool gets you a rendered floor and a square-foot estimate. If the number works, we'll schedule the walkthrough.
Start Your Design